Checkline Vietnam

Model: DX2-3000-EDM-G
Hand-Held Mechanical Wire EDM Tension Meter,
100 – 3000 Grams (Gram units)
100mm outer roller spacing, supplied with V-Grooved Rollers- Supplied in carrying case

Checkline Vietnam

Model: TI-25MX
Ultrasonic Wall Thickness Gauge Complete Kit with T-102-3300 Probe
Supplied in foam-fitted hard plastic carrying case with 4oz coupling fluid – 2 AA Alkaline Batteries and NIST Traceable Calibration Cert/ Made in the USA
(Replace for obsolete TI-25M)
Máy đo độ dày tường siêu âm TI-25MX Checkline

Checkline Vietnam

Model: DTSM-10T
Digital Torque Screwdriver
100 – 1000 Ncm (10Nm) / 8.8 – 88 lb-in MST010S
Accuracy +/-1% of indicated, bi-directional
Includes
UKAS Traceable
Calibration Certificate
USB
Output
Software

Checkline Vietnam

Model: ITIO-10
10 oz-in / 7 N-cm Torque Transducer with Bench Stand, 1/4″ Dr.
Accuracy: +/-0.5% of indicated, Includes Run-Down Fixture
Notes: ITIO-10 accuracy is +/-1% from 10-100% of capacity
Power tools require the use of a run-down-fixture
Not for use with impact tools or torque multipliers

Checkline Vietnam

Model: ET-2109LSR Tachometer
Tachometer Description: Intrinsically Safe Tachometer kit, 3.0 – 99,999 rpm, contact &;
non-contact operation.

Checkline Vietnam

Model: DTMB-5KB
Description: Hand-Held Digital Tension Meter (500 – 5000 g)
Outer Roller Spacing 100 mm (c:c). Displays Max, Min, Avg and Peak Values

Checkline Vietnam

Model: BTM-400PLUS
Belt Tension Meter
Measuring Range: 10 – 800 Hz

Checkline Vietnam

Model: TT-4102000F-IMP
Impact Torque Test System – 200-2000 lb-ft range, includes display and run-down-fixture
Bolts to bench for secure testing of a wide range of impact tools
NOTE: TT-41000 Series impact torque testers are designed to check tool operation and consistency. The measured torque value does not precisely indicate the effective clamp load of the bolt and may vary +/-20% from the wrench specifications.

Checkline Vietnam

Model: TI-25MX
Description: Ultrasonic Wall Thickness Gauge Complete Kit with T-102-3300 Probe
NOTE: the model TI-25M has been replaced by the model TI25MX.

Checkline Vietnam

Model: RX-DD-ASK-C-SS
Asker C Digital Durometer with Stainless Steel Barrel normally used on sneaker foam

Checkline Vietnam

Model: DHT-3
Digital Textile Moisture Meter with 414 and 418 electrodes, Humy Tester III 3

Checkline Vietnam

Model: HTGS-85L
Digital Torque Gauge, 85.00 lb-in, 13mm chuck

Checkline Vietnam

Model: ZIVY 120
Description: Zivy Tension Meter 20 – 120 cN – TEN-120K 1750/001/00/120
Supplied in a foam-fitted, plastic carrying case
with instructions and a spanner wrench

Checkline Vietnam

Model: T-402-5507
Description: 1/4″ diameter, 15 MHz delay line transducer with cable, 1/2″ and 3/8″ length delay line tips.

Checkline Vietnam

Model: 41016
Description: 50,000 Lb-Ft / 67,800 Nm Torque Test Stand, 3.5″ F Dr, WITH AWS-4050 Display on Articulating Arm
Built on 18″ x 24″ plate with Casters, Adjustable Reaction Post
Accuracy +/-0.5%

Checkline Vietnam

Model: 41015-HYDP
Description: 10,000 Lb-Ft / 13,558 Nm Torque Test Stand, 1.5″ F Dr, WITH Built-in Compact Display
Built on 14″ x 19″ plate with Casters, Adjustable Reaction Post
Accuracy +/-0.5%

Checkline Vietnam

Model: 41011
Description: 1,000 Lb-Ft / 1,355 Nm Torque Test Stand, 1.5″ F Dr, WITH AWS-4050 Display on Articulating Arm
Built on 14″ x 19″ plate with Casters, Adjustable Reaction Post
Accuracy +/-0.5%

Checkline Vietnam

Model: BMX50F
Description: BMX50F Torque Sensor (5 – 50 Lb-ft) – (pn 077010)
NOTE: IF BUYING WITHOUT DISPLAY, OBTAIN SERIAL # OF DISPLAY FROM YOUR CUSTOMER SO FIRMWARE CAN BE MATCHED and CONFIRM CUSTOMER HAS THE 072000 CABLE FOR CONNECTION TO THEIR PTT-2000 DISPLAY

Checkline Vietnam

Model: BMX250F
Description: BMX250F Torque Sensor (25 – 250 Lb-ft) – (pn 077012)
NOTE: IF BUYING WITHOUT DISPLAY, OBTAIN SERIAL # OF DISPLAY FROM YOUR CUSTOMER SO FIRMWARE CAN BE MATCHED and CONFIRM CUSTOMER HAS THE 072000 CABLE FOR CONNECTION TO THEIR PTT-2000 DISPLAY

Checkline Vietnam

Model: BMX2500F
Description: BMX2500F Torque Sensor (250 – 2500 Lb-ft) – (pn 077015)
NOTE: IF BUYING WITHOUT DISPLAY, OBTAIN SERIAL # OF DISPLAY FROM YOUR CUSTOMER SO FIRMWARE CAN BE MATCHED and CONFIRM CUSTOMER HAS THE 072000 CABLE FOR CONNECTION TO THEIR PTT-2000 DISPLAY

Checkline Vietnam

Model: BMX2500F
Description: BMX2500F Torque Sensor (250 – 2500 Lb-ft) – (pn 077015)
NOTE: IF BUYING WITHOUT DISPLAY, OBTAIN SERIAL # OF DISPLAY FROM YOUR CUSTOMER SO FIRMWARE CAN BE MATCHED and CONFIRM CUSTOMER HAS THE 072000 CABLE FOR CONNECTION TO THEIR PTT-2000 DISPLAY

Checkline Vietnam

Model: PTT-2000
Description: PTT-2000 Torque Analyzer 072999
Supplied as a complete kit with battery charger, USB cable/software,
protective cover in foam-filled carrying case.
NOTE: Torque Testers Sold Separately.

Checkline Vietnam

Model: 072002
Description: Cable PTT to BMX

Checkline Vietnam

Model: 41016
Description: 50,000 Lb-Ft / 67,800 Nm Torque Test Stand, 3.5″ F Dr, WITH AWS-4050 Display on Articulating Arm
Built on 18″ x 24″ plate with Casters, Adjustable Reaction Post
Accuracy +/-0.5%

Checkline Vietnam

Model: 41015-HYDP
Description: 10,000 Lb-Ft / 13,558 Nm Torque Test Stand, 1.5″ F Dr, WITH Built-in Compact Display
Built on 14″ x 19″ plate with Casters, Adjustable Reaction Post
Accuracy +/-0.5%

Checkline Vietnam

Model: 41011
Description: 1,000 Lb-Ft / 1,355 Nm Torque Test Stand, 1.5″ F Dr, WITH AWS-4050 Display on Articulating Arm
Built on 14″ x 19″ plate with Casters, Adjustable Reaction Post
Accuracy +/-0.5%

Checkline Vietnam

Model: BMX50F
Description: BMX50F Torque Sensor (5 – 50 Lb-ft) – (pn 077010)
NOTE: IF BUYING WITHOUT DISPLAY, OBTAIN SERIAL # OF DISPLAY FROM YOUR CUSTOMER SO FIRMWARE CAN BE MATCHED and CONFIRM CUSTOMER HAS THE 072000 CABLE FOR CONNECTION TO THEIR PTT-2000 DISPLAY

Checkline Vietnam

Model: BMX250F
Description: BMX250F Torque Sensor (25 – 250 Lb-ft) – (pn 077012)
NOTE: IF BUYING WITHOUT DISPLAY, OBTAIN SERIAL # OF DISPLAY FROM YOUR CUSTOMER SO FIRMWARE CAN BE MATCHED and CONFIRM CUSTOMER HAS THE 072000 CABLE FOR CONNECTION TO THEIR PTT-2000 DISPLAY

Checkline Vietnam

Model: BMX2500F
Description: BMX2500F Torque Sensor (250 – 2500 Lb-ft) – (pn 077015)
NOTE: IF BUYING WITHOUT DISPLAY, OBTAIN SERIAL # OF DISPLAY FROM YOUR CUSTOMER SO FIRMWARE CAN BE MATCHED and CONFIRM CUSTOMER HAS THE 072000 CABLE FOR CONNECTION TO THEIR PTT-2000 DISPLAY

Checkline Vietnam

Model: BMX2500F
Description: BMX2500F Torque Sensor (250 – 2500 Lb-ft) – (pn 077015)
NOTE: IF BUYING WITHOUT DISPLAY, OBTAIN SERIAL # OF DISPLAY FROM YOUR CUSTOMER SO FIRMWARE CAN BE MATCHED and CONFIRM CUSTOMER HAS THE 072000 CABLE FOR CONNECTION TO THEIR PTT-2000 DISPLAY

Checkline Vietnam

Model: PTT-2000
Description: PTT-2000 Torque Analyzer 072999
Supplied as a complete kit with battery charger, USB cable/software,
protective cover in foam-filled carrying case.
NOTE: Torque Testers Sold Separately.

Checkline Vietnam

Model: 072002
Description: Cable PTT to BMX

Checkline Vietnam

Model: DTMB-2K
Description: Hand-Held Digital Tension Meter (200 – 2000 grams)
with v-grooved rollers for speeds up to 1000 m/min. Outer roller spacing of 38 mm (c:c)